Jointer Shelf - A Little Sanding and Finishing

Now that the shelf has had time to dry, I need to sand, and apply finish.

The glue is dry, and the shelf is ready for further work.

Edges have been rounded over, and the sanding is complete.

The shelf is finished with a coat of linseed oil.

The other part of this project involves a set of handles mounted to the jointer. The handles are finished for the most part, all that is needed is the location and drilling of the bolt-holes, and a little sanding and linseed oil.

Hole located...

Countersink for bolt head and washer completed.

Marking the bolt with a Dremel, so it can be cut to the correct length.

Sanded, with a coat of linseed oil.

The only thing that's left is to let the linseed oil dry, and mount the jointer permanently to the handles.